This post describs on the mqsc display command and how to use them. Operators & Administrators will be able to use mqsc display command after reading the post.
For those who are new to mqsc commands, mqsc commands can be executed in two days 1. directly - sends mqsc commands directly to the local queue manager and indirectly- running mqsc commands for a remote queue manager in local QM.
Here, I am explaining the mqsc DISPLAY commands as per MQ version 7.1. Below are the list of display commands.
DISPLAY AUTHINFO (*)
DISPLAY AUTHINFO (*) ALL
DISPLAY AUTHINFO (*) DESCR, AUTHTYPE
DISPLAY AUTHINFO (SYSTEM.DEFAULT.AUTHINFO.OCSP) DESCR, AUTHTYPE
dis authinfo (*)
dis authinfo (*) all
dis authinfo (*) desc
dis authinfo (SYSTEM.DEFAULT.AUTHINFO.OCSP) descr, conname
PURPOSE: To display the authority records associated with a profile. It will display authority records associated PROFILES or OBJTYPE, If these parameters are omitted then it will show for all the lists.
DISPLAY AUTHREC
[ PROFILE( profile_name ) ]
[ OBJTYPE( AUTHINFO | CHANNEL | CLNTCONN | COMMINFO | LISTENER |
NAMELIST | PROCESS | QMGR | QUEUE | RQMNAME |
SERVICE | TOPIC ) ]
[ PRINCIPAL( principal_name ) | GROUP( group_name ) ]
[ MATCH( PROFILE | MEMBERSHIP | EXACT ) ]
[ SERVCOMP( service_component_name ) ]
[ ALL ] [ AUTHLIST ] [ ENTITY ] [ ENTTYPE ]
DISPLAY AUTHREC ALL
DISPLAY AUTHREC PROFILE(SYSTEM.ADMIN.CHANNEL.EVENT)
DISPLAY AUTHREC OBJTYPE(QMGR)
DIS AUTHREC OBJTYPE(NAMELIST)
PURPOSE: to display information about the level of function supported by the installed authorization services.
DISPLAY AUTHSERV
[ ALL ] [ IFVER ] [ UIDSUPP ]
DISPLAY AUTHSERV ALL
DISPLAY AUTHSERV IFVER
dis authserv ifver
PURPOSE: To display channel definition details.
DISPLAY CHANNEL( generic_channel_name )
[ WHERE( filter_keyword operator filter_value ) ]
[ TYPE( ALL | SDR | SVR | RCVR | RQSTR | CLNTCONN | SVRCONN |
CLUSSDR | CLUSRCVR | MQTT* ) ]
[ ALL ] [ AFFINITY ] [ ALTDATE ] [ ALTTIME ] [ BACKLOG ]
[ BATCHHB ] [ BATCHINT ] [ BATCHLIM ] [ BATCHSZ ] [ CHLTYPE ]
[ CLNTWGHT ] [ CLWLPRTY ] [ CLWLRANK ] [ CLWLWGHT ] [ COMPHDR ]
[ COMPMSG ] [ CONNAME ] [ CONVERT ] [ DEFRECON ] [ DESCR ]
[ DISCINT ] [ HBINT ] [ KAINT ] [ LOCLADDR ] [ LONGRTY ]
[ LONGTMR ] [ MAXINST ] [ MAXINSTC ] [ MAXMSGL ] [ MCANAME ]
[ MCATYPE ] [ MCAUSER ] [ MODENAME ] [ MONCHL ] [ MRDATA ]
[ MREXIT ] [ MRRTY ] [ MRTMR ] [ MSGDATA ] [ MSGEXIT ]
[ NPMSPEED ] [ PASSWORD ] [ PORT ] [ PROPCTL ] [ PUTAUT ]
[ QMNAME ] [ RCVDATA ] [ RCVEXIT ] [ RESETSEQ ] [ SCYDATA ]
[ SCYEXIT ] [ SENDDATA ] [ SENDEXIT ] [ SEQWRAP ] [ SHARECNV ]
[ SHORTRTY ] [ SHORTTMR ] [ SSLCAUTH ] [ SSLCIPH ] [ SSLKEYP ]
[ SSLKEYR ] [ SSLPEER ] [ STATUS ] [ TPNAME ] [ TRPTYPE ]
[ TYPE ] [ USECLTID ] [ USEDLQ ] [ USERID ] [ XMITQ ]
DISPLAY CHANNEL(*)
DISPLAY CHANNEL(*) ALL
DISPLAY CHANNEL(*) TRPTYPE,CONVERT
DISPLAY CHANNEL(QM01.TO.QM02)
DISPLAY CHANNEL(QM01.TO.QM02) ALL
DISPLAY CHANNEL(QM01.TO.*) ALL
DISPLAY CHSTATUS(*) CURRENT
DISPLAY CHSTATUS(*) SAVED - Note that the saved status does not apply until at least one batch of messages has been transmitted on the channel.
dis chs (*)
dis chs (*) ALL
dis chs (QM01.TO.QM02) CURMSGS, INDOUBT
dis chs (QM01.TO.QM0*) curmsgs, npmspeed
PURPOSE: To display channel authentication record.
DISPLAY CHLAUTH( channel_profile )
[ WHERE( filter_keyword operator filter_value ) ]
[ TYPE( ALL ) ]
MATCH( RUNCHECK )
ADDRESS( string )
QMNAME( qmname ) | CLNTUSER( string )
[ SSLPEER( string ) ]
[ ALL ] [ ALTDATE ] [ ALTTIME ] [ CUSTOM ]
[ DESCR ]
DISPLAY CHLAUTH (*)
DISPLAY CHLAUTH (*) ALL
DISPLAY CHLAUTH (SYSTEM.ADMIN.SVRCONN) DESC, ALTDATE
dis chlauth (*)
dis chlauth (*) all
dis chlauth (SYSTEM.ADMIN.SVRCONN) altdate, alttime
PURPOSE: To display one or more channel status
DISPLAY CHSTATUS( generic_channel_name )
[ WHERE( filter_keyword operator filter_value ) ]
[ CURRENT | SAVED ] [ ALL ]
[ CONNAME( connection_name ) ] [ XMITQ( q_name ) ]
[ BATCHES ] [ BATCHSZ ] [ BUFSRCVD ] [ BUFSSENT ] [ BYTSRCVD ]
[ BYTSSENT ] [ CHSTADA ] [ CHSTATI ] [ COMPHDR ] [ COMPMSG ]
[ COMPRATE ] [ COMPTIME ] [ CURLUWID ] [ CURMSGS ] [ CURSEQNO ]
[ CURSHCNV ] [ EXITTIME ] [ HBINT ] [ INDOUBT ] [ JOBNAME ]
[ LOCLADDR ] [ LONGRTS ] [ LSTLUWID ] [ LSTMSGDA ] [ LSTMSGTI ]
[ LSTSEQNO ] [ MAXSHCNV ] [ MCASTAT ] [ MCAUSER ] [ MONCHL ]
[ MONITOR ] [ MSGS ] [ NETTIME ] [ NPMSPEED ] [ RAPPLTAG ]
[ RPRODUCT ] [ RQMNAME ] [ RVERSION ] [ SHORTRTS ] [ SSLCERTI ]
[ SSLKEYDA ] [ SSLKEYTI ] [ SSLPEER ] [ SSLRKEYS ] [ STATUS ]
[ STOPREQ ] [ SUBSTATE ] [ XBATCHSZ ] [ XQMSGSA ] [ XQTIME ]
DISPLAY CHSTATUS (*)
DISPLAY CHSTATUS (*) ALL
DISPLAY CHSTATUS (01.TO*) CURRENT
dis chstatus (*)
dis chstatus (chl.01.02) all
dis chstatus (01.TO*) indoubt
PURPOSE: To display details about cluster channels for queue managers.
DISPLAY CLUSQMGR( generic_Q_Mgr_name )
[ WHERE( filter_keyword operator filter_value ) ]
[ CLUSTER( generic_cluster_name ) ] [ CHANNEL( generic_channel_name ) ]
[ ALL ] [ ALTDATE ] [ ALTTIME ] [ BATCHHB ] [ BATCHINT ]
[ BATCHSZ ] [ CHANNEL ] [ CLUSDATE ] [ CLUSTER ] [ CLUSTIME ]
[ CLWLPRTY ] [ CLWLRANK ] [ CLWLWGHT ] [ COMPHDR ] [ COMPMSG ]
[ CONNAME ] [ CONVERT ] [ DEFTYPE ] [ DESCR ] [ DISCINT ]
[ HBINT ] [ KAINT ] [ LOCLADDR ] [ LONGRTY ] [ LONGTMR ]
[ MAXMSGL ] [ MCANAME ] [ MCATYPE ] [ MCAUSER ] [ MODENAME ]
[ MRDATA ] [ MREXIT ] [ MRRTY ] [ MRTMR ] [ MSGDATA ]
[ MSGEXIT ] [ NETPRTY ] [ NPMSPEED ] [ PASSWORD ] [ PROPCTL ]
[ PUTAUT ] [ QMID ] [ QMTYPE ] [ RCVDATA ] [ RCVEXIT ]
[ SCYDATA ] [ SCYEXIT ] [ SENDDATA ] [ SENDEXIT ] [ SEQWRAP ]
[ SHORTRTY ] [ SHORTTMR ] [ SSLCAUTH ] [ SSLCIPH ] [ SSLPEER ]
[ STATUS ] [ SUSPEND ] [ TPNAME ] [ TRPTYPE ] [ USEDLQ ]
[ USERID ]
Make sure that you run the this mqsc command on any of the QM on the cluster.
DISPLAY CLUSQMGR (*)
DISPLAY CLUSQMGR (*) all
DISPLAY CLUSQMGR (QM.JOE.02) all
dis clusqmgr (*) qmtype
dis clusqmgr (QM.JOE.02) channel, conname, descr
PURPOSE: To display communication information object's attributes.
DISPLAY COMMINFO( comminfo_name )
[ WHERE( filter_keyword operator filter_value ) ]
[ TYPE( MULTICAST ) ]
[ ALL ] [ ALTDATE ] [ ALTTIME ] [ BRIDGE ] [ CCSID ]
[ COMMEV ] [ DESCR ] [ ENCODING ] [ GRPADDR ] [ MCHBINT ]
[ MCPROP ] [ MONINT ] [ MSGHIST ] [ NSUBHIST ] [ PORT ]
[ TYPE ]
DISPLAY COMMINFO (*)
DISPLAY COMMINFO (*) ALL
DISPLAY COMMINFO (SYSTEM.DEFAULT.COMMINFO.MULTICAST) PORT, DESCR
dis comminfo (*)
dis comminfo (*) all
dis comminfo (SYSTEM.DEFAULT.COMMINFO.MULTICAST) port, descr
PURPOSE: To display connections details about the systems connected to the Queue manager.
DISPLAY CONN( connection_name )
[ WHERE( filter_keyword operator filter_value ) ]
[ EXTCONN( connection_name ) ]
[ TYPE( CONN | HANDLE | * | ALL ) ]
[ ALL ] [ APPLDESC ] [ APPLTAG ] [ APPLTYPE ] [ ASTATE ]
[ CHANNEL ] [ CONNAME ] [ CONNOPTS ] [ DEST ] [ DESTQMGR ]
[ EXTURID ] [ HSTATE ] [ OBJNAME ] [ OBJTYPE ] [ OPENOPTS ]
[ PID ] [ QMURID ] [ READA ] [ SUBID ] [ SUBNAME ]
[ TID ] [ TOPICSTR ] [ UOWLOG ] [ UOWLOGDA ] [ UOWLOGTI ]
[ UOWSTATE ] [ UOWSTDA ] [ UOWSTTI ] [ URTYPE ] [ USERID ]
DISPLAY CONN (*)
DISPLAY CONN (*) ALL
DISPLAY CONN (*) PID
DISPLAY CONN (*) PID, USERID, CHANNEL
dis conn (*)
dis conn (*) all
dis conn (*) userid
dis conn (*) channel, appltype, userid
PURPOSE: To display the authorizations an entity.
DISPLAY ENTAUTH
PRINCIPAL( principal_name ) | GROUP( group_name )
[ OBJNAME( obj_name )]
OBJTYPE( AUTHINFO | CHANNEL | CLNTCONN | COMMINFO | LISTENER |
NAMELIST | PROCESS | QMGR | QUEUE | RQMNAME |
SERVICE | TOPIC )
[ SERVCOMP( service_component_name ) ]
[ ALL ] [ AUTHLIST ] [ ENTITY ] [ ENTTYPE ] [ OBJTYPE ]
PURPOSE: To display listeners details.
DISPLAY LISTENER( listener_name )
[ WHERE( filter_keyword operator filter_value ) ]
[ TRPTYPE( ALL | NETBIOS | LU62 | SPX | TCP ) ]
[ ALL ] [ ADAPTER ] [ ALTDATE ] [ ALTTIME ] [ BACKLOG ]
[ COMMANDS ] [ CONTROL ] [ DESCR ] [ IPADDR ] [ LOCLNAME ]
[ NTBNAMES ] [ PORT ] [ SESSIONS ] [ SOCKET ] [ TPNAME ]
[ TRPTYPE ]
DISPLAY LISTENER (*)
DISPLAY LISTENER (*) ALL
DISPLAY LISTENER (*) PORT, DESCR
DISPLAY LISTENER (BO_LISTENER*) PORT, TRPTYPE
dis listener (*)
dis listener (*) all
dis listener (*) port
dis listener (BO_LISTENER1) all
PURPOSE: To display one or more listeners status.
DISPLAY LSSTATUS( listener_name )
[ WHERE( filter_keyword operator filter_value ) ]
[ ALL ] [ ADAPTER ] [ BACKLOG ] [ COMMANDS ] [ CONTROL ]
[ DESCR ] [ IPADDR ] [ LOCLNAME ] [ NTBNAMES ] [ PID ]
[ PORT ] [ SESSIONS ] [ SOCKET ] [ STARTDA ] [ STARTTI ]
[ STATUS ] [ TPNAME ] [ TRPTYPE ]
DISPLAY LSSTATUS (*)
DISPLAY LSSTATUS (*) ALL
DISPLAY LSSTATUS (*) DESCR
DISPLAY LSSTATUS (BO_LISTENER*) PORT, DESCR, PID
dis lsstatus (*)
dis lsstatus (*) all
dis lsstatus (*) port, descr
dis lsstatus (BO_LISTENER1) pid
PURPOSE: To display namelist details.
DISPLAY NAMELIST( generic_namelist_name )
[ WHERE( filter_keyword operator filter_value ) ]
[ ALL ] [ ALTDATE ] [ ALTTIME ] [ DESCR ] [ NAMCOUNT ] [ NAMES ]
DISPLAY NAMELIST (*)
DISPLAY NAMELIST (*) ALL
DISPLAY NAMELIST (SYSTEM.DEFAULT.NAMELIST) DESCR
DISPLAY NAMELIST (MQM_NAMELIST_0*) DESCR, NAMES
dis namelist (*)
dis namelist (*) all
dis namelist (system.default.namelist) descr
dis namelist (MQM_NAMELIST_O*) names, descr, namcount
PURPOSE: To display one or more MQ QM's process details.
DISPLAY PROCESS( generic_process_name )
[ WHERE( filter_keyword operator filter_value ) ]
[ ALL ]
[ ALTDATE ] [ ALTTIME ] [ APPLICID ] [ APPLTYPE ] [ DESCR ] [ ENVRDATA ] [ USERDATA ]
DISPLAY PROCESS (*)
DISPLAY PROCESS (*) ALL
DISPLAY PROCESS (MQ_PROCESS_01) DESCR
DISPLAY PROCESS (QM_PROCESS_*) DESCR, ENVRDATA, USERDATA
dis process (*)
dis process (*) all
dis process (QM_PROCESS_01) descr
dis process (QM_PROCESS_*) desc, evnrdata, userdata
PURPOSE: To display publish/subscribe status information for a queue manager.
DISPLAY PUBSUB
[ WHERE( filter_keyword operator filter_value ) ]
[ TYPE( ALL | LOCAL | PARENT | CHILD ) ]
[ ALL ] [ QMNAME ] [ STATUS ] [ TYPE ]
DISPLAY PUBSUB ALL
DISPLAY PUBSUB TYPE
PURPOSE: To display one or more alias queue information.
DISPLAY QALIAS( generic_q_name )
[ WHERE( filter_keyword operator filter_value ) ]
[ CLUSTER( generic_cluster_name ) ] [ CLUSNL( generic_namelist_name ) ]
[ ALL ] [ ALTDATE ] [ ALTTIME ] [ CLUSDATE ] [ CLUSINFO ]
[ CLUSNL ] [ CLUSQMGR ] [ CLUSQT ] [ CLUSTER ] [ CLUSTIME ]
[ CLWLPRTY ] [ CLWLRANK ] [ CUSTOM ] [ DEFBIND ] [ DEFPRESP ]
[ DEFPRTY ] [ DEFPSIST ] [ DEFREADA ] [ DESCR ] [ GET ]
[ PROPCTL ] [ PUT ] [ QMID ] [ QTYPE ] [ SCOPE ]
[ TARGET ] [ TARGTYPE ] [ TYPE ]
DISPLAY QALIAS (*)
DISPLAY QALIAS (*) ALL
DISPLAY QALIAS (TEST.ALIAS.*) ALTDATE
DISPLAY QALIAS (TEST.ALIAS.Q) ALTDATE, DESCR
dis qalias (*)
dis qalias (*) all
dis qalias (test*) altdate
dis qalias (test.alias.q) descr
PURPOSE: To display one or more cluster queue information for cluster.
DISPLAY QCLUSTER( generic_q_name )
[ WHERE( filter_keyword operator filter_value ) ]
[ CLUSTER( generic_cluster_name ) ]
[ ALL ] [ ALTDATE ] [ ALTTIME ] [ CLUSDATE ] [ CLUSQMGR ]
[ CLUSQT ] [ CLUSTIME ] [ CLWLUSEQ ] [ DEFBIND ] [ DEFPRTY ]
[ DEFPSIST ] [ DESCR ] [ PUT ] [ QTYPE ] [ STATQ ]
[ TYPE ]
DISPLAY QCLUSTER(*) ALL
dis qcluster(*) descr, clusqmgr
PURPOSE: To display one or more local queue information.
DISPLAY QMGR
[ ALL ]
[ SYSTEM ] [ EVENT ] [ DQM ] [ CLUSTER ] [ PUBSUB ]
[ ACCTCONO ] [ ACCTINT ] [ ACCTMQI ] [ ACCTQ ] [ ACTIVREC ]
[ ACTVCONO ] [ ACTVTRC ] [ ALTDATE ] [ ALTTIME ] [ AUTHOREV ]
[ CCSID ] [ CERTVPOL ] [ CHAD ] [ CHADEV ] [ CHADEXIT ]
[ CHLAUTH ] [ CHLEV ] [ CLWLDATA ] [ CLWLEXIT ] [ CLWLLEN ]
[ CLWLMRUC ] [ CLWLUSEQ ] [ CMDEV ] [ CMDLEVEL ] [ COMMANDQ ]
[ CONFIGEV ] [ CRDATE ] [ CRTIME ] [ CUSTOM ] [ DEADQ ]
[ DEFXMITQ ] [ DESCR ] [ DISTL ] [ INHIBTEV ] [ IPADDRV ]
[ LOCALEV ] [ LOGGEREV ] [ MARKINT ] [ MAXHANDS ] [ MAXMSGL ]
[ MAXPROPL ] [ MAXPRTY ] [ MAXUMSGS ] [ MONACLS ] [ MONCHL ]
[ MONQ ] [ PARENT ] [ PERFMEV ] [ PLATFORM ] [ PSCLUS ]
[ PSMODE ] [ PSNPMSG ] [ PSNPRES ] [ PSRTYCNT ] [ PSSYNCPT ]
[ QMID ] [ QMNAME ] [ REMOTEEV ] [ REPOS ] [ REPOSNL ]
[ ROUTEREC ] [ SCHINIT ] [ SCMDSERV ] [ SSLCRLNL ] [ SSLCRYP ]
[ SSLFIPS ] [ SSLEV ] [ SSLKEYR ] [ SSLRKEYC ] [ STATACLS ]
[ STATCHL ] [ STATINT ] [ STATMQI ] [ STATQ ] [ STRSTPEV ]
[ SUITEB ] [ SYNCPT ] [ TREELIFE ] [ TRIGINT ] [ VERSION ]
[ XRCAP ]
PURPOSE: To display one or more model queue information.
DISPLAY QMODEL( generic_q_name )
[ WHERE( filter_keyword operator filter_value ) ]
[ ALL ] [ ACCTQ ] [ ALTDATE ] [ ALTTIME ] [ BOTHRESH ]
[ BOQNAME ] [ CRDATE ] [ CRTIME ] [ CUSTOM ] [ DEFPRESP ]
[ DEFPRTY ] [ DEFPSIST ] [ DEFREADA ] [ DEFSOPT ] [ DEFTYPE ]
[ DESCR ] [ DISTL ] [ GET ] [ HARDENBO ] [ INITQ ]
[ MAXDEPTH ] [ MAXMSGL ] [ MONQ ] [ MSGDLVSQ ] [ NPMCLASS ]
[ PROCESS ] [ PUT ] [ PROPCTL ] [ QDEPTHHI ] [ QDEPTHLO ]
[ QDPHIEV ] [ QDPLOEV ] [ QDPMAXEV ] [ QSVCIEV ] [ QSVCINT ]
[ QTYPE ] [ RETINTVL ] [ SHARE ] [ STATQ ] [ TRIGDATA ]
[ TRIGDPTH ] [ TRIGGER ] [ TRIGMPRI ] [ TRIGTYPE ] [ TYPE ]
[ USAGE ]
DISPLAY QMODEL (*)
DISPLAY QMODEL (*) ALL
DISPLAY QMODEL (JOE.TEST.*) BOTHRESH
DISPLAY QMODEL (JOE.TEST.MODEL.Q) BOTHRESH, ALTDATE
dis qmodel (*)
dis qmodel (*) all
dis qmodel (JOE.TEST.*) bothresh
dis qmodel (JOE.TEST.*) bothresh, altdate
PURPOSE: To display the status of the Queue manager associated.
PURPOSE: To display one or more remote queue information.
DISPLAY QREMOTE( generic_q_name )
[ WHERE( filter_keyword operator filter_value ) ]
[ CLUSTER( generic_cluster_name ) ] [ CLUSNL( generic_namelist_name ) ]
[ ALL ] [ ALTDATE ] [ ALTTIME ] [ CLUSDATE ] [ CLUSINFO ]
[ CLUSNL ] [ CLUSQMGR ] [ CLUSQT ] [ CLUSTER ] [ CLUSTIME ]
[ CLWLPRTY ] [ CLWLRANK ] [ CUSTOM ] [ DEFBIND ] [ DEFPRESP ]
[ DEFPRTY ] [ DEFPSIST ] [ DESCR ] [ PUT ] [ QMID ]
[ QTYPE ] [ RNAME ] [ RQMNAME ] [ SCOPE ] [ TARGET ]
[ TYPE ] [ XMITQ ]
DISPALY QREMOTE (*)
DISPLAY QREMOTE (*) ALL
DISPLAY QREMOTE (QM02)
DISPLAY QREMOTE (QM*) XMITQ
dis qremote (*)
dis qremote (*) all
dis qremote (QM02) all
dis qremote (QM02) xmitq
PURPOSE: To display one or more queue status information.
DISPLAY QSTATUS( q_name ) TYPE( QUEUE )
[ WHERE( filter_keyword operator filter_value ) ]
[ CURDEPTH ] [ IPPROCS ] [ MEDIALOG ] [ LGETDATE ] [ LGETTIME ]
[ LPUTDATE ] [ LPUTTIME ] [ MONITOR ] [ MONQ ] [ MSGAGE ]
[ OPPROCS ] [ QTIME ] [ UNCOM ]
DISPLAY QSTATUS( q_name ) TYPE ( HANDLE )
[ WHERE( filter_keyword operator filter_value ) ]
[ OPENTYPE ( ALL | INPUT | OUTPUT ) ]
[ APPLDESC ] [ APPLTAG ] [ APPLTYPE ] [ ASTATE ] [ BROWSE ]
[ CHANNEL ] [ CONNAME ] [ HSTATE ] [ INPUT ] [ INQUIRE ]
[ OUTPUT ] [ PID ] [ QMURID ] [ SET ] [ TID ]
[ URID ] [ URTYPE ] [ USERID ]
DISPLAY QSTATUS (*)
DISPLAY QSTATUS (*) ALL
DISPLAY QSTATUS (QM*) LGETDATE
DISPLAY QSTATUS (QM.01.02.XMIT.Q) LGETDATE, LPUTDATE
dis qstatus (*)
dis qstatus (*) ALL
dis qstatus (QM*) LGETDATE
dis qstatus (QM.01.02.XMIT.Q) LGETDATE, LPUTDATE
PURPOSE: To display one or more queue attributes.
DISPLAY QUEUE( generic_q_name )
[ WHERE( filter_keyword operator filter_value ) ]
[ CLUSTER( generic_cluster_name ) ] [ CLUSNL( generic_namelist_name )
[ TYPE( QALIAS | QCLUSTER | QLOCAL | QMODEL | QREMOTE ) ]
[ ALL ] [ ALTDATE ] [ ALTTIME ] [ BOQNAME ] [ BOTHRESH ]
[ CLUSDATE ] [ CLUSINFO ] [ CLUSNL ] [ CLUSQMGR ] [ CLUSQT ]
[ CLUSTER ] [ CLUSTIME ] [ CLWLPRTY ] [ CLWLRANK ] [ CLWLUSEQ ]
[ CRDATE ] [ CRTIME ] [ CURDEPTH ] [ CUSTOM ] [ DEFBIND ]
[ DEFPRESP ] [ DEFPRTY ] [ DEFPSIST ] [ DEFREADA ] [ DEFSOPT ]
[ DEFTYPE ] [ DESCR ] [ DISTL ] [ GET ] [ HARDENBO ]
[ INITQ ] [ IPPROCS ] [ MAXDEPTH ] [ MAXMSGL ] [ MONQ ]
[ MSGDLVSQ ] [ OPPROCS ] [ PROCESS ] [ PROPCTL ] [ PUT ]
[ QDEPTHHI ] [ QDEPTHLO ] [ QDPHIEV ] [ QDPLOEV ] [ QDPMAXEV ]
[ QMID ] [ QSVCIEV ] [ QSVCINT ] [ QTYPE ] [ RETINTVL ]
[ RNAME ] [ RQMNAME ] [ SCOPE ] [ SHARE ] [ TARGET ]
[ TARGTYPE ] [ TRIGDATA ] [ TRIGDPTH ] [ TRIGGER ] [ TRIGMPRI ]
[ TRIGTYPE ] [ TYPE ] [ USAGE ] [ XMITQ ]
DISPLAY QUEUE (*)
DISPLAY QUEUE (*) ALL
DISPLAY QUEUE (*) ALTDATE
DISPLAY QUEUE (*) ALTDATE, DESCR
dis queue (*)
dis queue (*) all
dis queue (*) maxdepth
dis queue (*) maxdepth, trigdpth
PURPOSE: To display the status of a subscription.
DISPLAY SBSTATUS ( subscription_name )
DISPLAY SBSTATUS SUBID( subscription_id )
[ WHERE( filter_keyword operator filter_value ) ]
[ DURABLE( ALL | YES | NO ) ]
[ SUBTYPE( ALL | ADMIN | API | PROXY | USER ) ]
[ ALL ] [ ACTCONN ] [ DURABLE ] [ LMSGDATE ] [ LMSGTIME ]
[ MCASTREL ] [ NUMMSGS ] [ RESMDATE ] [ RESMTIME ] [ SUBTYPE ]
[ SUBUSER ]
DISPLAY SBSTATUS (*)
DISPLAY SBSTATUS (*) ALL
DISPLAY SBSTATUS (SYSTEM.DEFAULT.SUB) SUBUSER, LMSGDATE
DISPLAY SBSTATUS SUBID (414D5120514D2E4A4F452E3031202020DE3F7D5420001007) ALL
DISPLAY SBSTATUS SUBID (414D5120514D2E4A4F452E3031202020DE3F7D5420001007) LMSGDATE, LMSGTIME
dis sbstatus (PARENT) ALL
dis sbstatus (PARENT) lmsgdate, lmsgtime
PURPOSE: To display information about a service.
DISPLAY SERVICE( service_name )
[ WHERE( filter_keyword operator filter_value ) ]
[ ALL ] [ ALTDATE ] [ ALTTIME ] [ CONTROL ] [ DESCR ]
[ SERVTYPE ] [ STARTARG ] [ STARTCMD ] [ STDOUT ] [ STDERR ]
[ STOPARG ] [ STOPCMD ]
DISPLAY SERVICE (*)
DISPLAY SERVICE (*) ALL
DISPLAY SERVICE (QM_SERVICE_START) STARTCMD, STARTARG
DISPLAY SERVICE (QM_SERVICE_STOP) STOPCMD, STOPARG
dis service (*)
dis service (*) all
dis service (qm_service_start) startcmd, startarg
dis service (qm_service_stop) stopcmd, stoparg
PURPOSE: To display the attributes associated with a subscription.
DISPLAY SUB( subscription_name )
DISPLAY SUB SUBID( subscription_id )
[ WHERE( filter_keyword operator filter_value ) ]
[ DURABLE( ALL | YES | NO ) ]
[ SUBTYPE( ALL | ADMIN | API | PROXY | USER ) ]
[ ALL ] [ ALTDATE ] [ ALTTIME ] [ CRDATE ] [ CRTIME ]
[ DEST ] [ DESTCORL ] [ DESTCLAS ] [ DESTQMGR ] [ DURABLE ]
[ EXPIRY ] [ PSPROP ] [ PUBACCT ] [ PUBAPPID ] [ PUBPRTY ]
[ REQONLY ] [ SELECTOR ] [ SELTYPE ] [ SUB ] [ SUBID ]
[ SUBLEVEL ] [ SUBSCOPE ] [ SUBTYPE ] [ SUBUSER ] [ SUMMARY ]
[ TOPICOBJ ] [ TOPICSTR ] [ USERDATA ] [ VARUSER ] [ WSCHEMA ]
DISPLAY SUB (*)
DISPLAY SUB (*) ALL
DISPLAY SUB (MQ_SUB_022) ALL
DISPLAY SUB (MQ_SUB_022) EXPIRY, DESCR
DISPLAY SUB SUBID (414D5120514D2E4A4F452E3031202020D63F7D5410000006)
DISPLAY SUB SUBID (414D5120514D2E4A4F452E3031202020D63F7D5410000006) ALL
DISPLAY SUB SUBID (414D5120514D2E4A4F452E3031202020D63F7D5410000006) EXPIRY, DESCR, SUB
dis sub (*)
dis sub (MQ_SUB_024) expiry
dis sub subid(414D5120514D2E4A4F452E3031202020D63F7D5410000006) expiry, sub, durable
For those who are new to mqsc commands, mqsc commands can be executed in two days 1. directly - sends mqsc commands directly to the local queue manager and indirectly- running mqsc commands for a remote queue manager in local QM.
Here, I am explaining the mqsc DISPLAY commands as per MQ version 7.1. Below are the list of display commands.
DISPLAY AUTHINFO
DISPLAY AUTHREC
DISPLAY AUTHSERV
DISPLAY CHANNEL
DISPLAY CHLAUTH
DISPLAY CHSTATUS
DISPLAY CLUSQMGR
DISPLAY COMMINFO
DISPLAY CONN
DISPLAY ENTAUTH
DISPLAY LISTENER
DISPLAY LSSTATUS
DISPLAY NAMELIST
DISPLAY PROCESS
DISPLAY PUBSUB
DISPLAY QALIAS
DISPLAY QCLUSTER
DISPLAY QLOCAL
DISPLAY QMGR
DISPLAY QMODEL
DISPLAY QMSTATUS
DISPLAY QREMOTE
DISPLAY QSTATUS
DISPLAY QUEUE
DISPLAY SBSTATUS
DISPLAY SERVICE
DISPLAY SUB
DISPLAY AUTHINFO (DISPLAY AUTHENTICATION INFORMATION)
SYNONYM: DIS AUTHINFO
PURPOSE: To display authentication information object's attributes and details.
DISPLAY AUTHINFO( generic_authinfo_name )
[ WHERE( filter_keyword operator filter_value ) ]
[ AUTHTYPE( CRLLDAP | OCSP ) ]
[ ALL ] [ ALTDATE ] [ ALTTIME ] [ AUTHTYPE ] [ CONNAME ]
[ DESCR ] [ LDAPPWD ] [ LDAPUSER ] [ OCSPURL ]
DISPLAY AUTHINFO (*)
DISPLAY AUTHINFO (*) ALL
DISPLAY AUTHINFO (*) DESCR, AUTHTYPE
DISPLAY AUTHINFO (SYSTEM.DEFAULT.AUTHINFO.OCSP) DESCR, AUTHTYPE
dis authinfo (*)
dis authinfo (*) all
dis authinfo (*) desc
dis authinfo (SYSTEM.DEFAULT.AUTHINFO.OCSP) descr, conname
DISPLAY AUTHREC (DISPLAY AUTHORITY RECORD)
SYNONYM: DIS AUTHRECPURPOSE: To display the authority records associated with a profile. It will display authority records associated PROFILES or OBJTYPE, If these parameters are omitted then it will show for all the lists.
DISPLAY AUTHREC
[ PROFILE( profile_name ) ]
[ OBJTYPE( AUTHINFO | CHANNEL | CLNTCONN | COMMINFO | LISTENER |
NAMELIST | PROCESS | QMGR | QUEUE | RQMNAME |
SERVICE | TOPIC ) ]
[ PRINCIPAL( principal_name ) | GROUP( group_name ) ]
[ MATCH( PROFILE | MEMBERSHIP | EXACT ) ]
[ SERVCOMP( service_component_name ) ]
[ ALL ] [ AUTHLIST ] [ ENTITY ] [ ENTTYPE ]
DISPLAY AUTHREC ALL
DISPLAY AUTHREC PROFILE(SYSTEM.ADMIN.CHANNEL.EVENT)
DISPLAY AUTHREC OBJTYPE(QMGR)
DIS AUTHREC OBJTYPE(NAMELIST)
DISPLAY AUTHSERV (DISPLAY AUTHORIZATION SERVICES)
SYNONYM: DIS AUTHRECPURPOSE: to display information about the level of function supported by the installed authorization services.
DISPLAY AUTHSERV
[ ALL ] [ IFVER ] [ UIDSUPP ]
DISPLAY AUTHSERV ALL
DISPLAY AUTHSERV IFVER
dis authserv ifver
DISPLAY CHANNEL (DISPLAY CHANNEL DETAILS & DEFINITIONS)
SYNONYM: DIS CHANNELPURPOSE: To display channel definition details.
DISPLAY CHANNEL( generic_channel_name )
[ WHERE( filter_keyword operator filter_value ) ]
[ TYPE( ALL | SDR | SVR | RCVR | RQSTR | CLNTCONN | SVRCONN |
CLUSSDR | CLUSRCVR | MQTT* ) ]
[ ALL ] [ AFFINITY ] [ ALTDATE ] [ ALTTIME ] [ BACKLOG ]
[ BATCHHB ] [ BATCHINT ] [ BATCHLIM ] [ BATCHSZ ] [ CHLTYPE ]
[ CLNTWGHT ] [ CLWLPRTY ] [ CLWLRANK ] [ CLWLWGHT ] [ COMPHDR ]
[ COMPMSG ] [ CONNAME ] [ CONVERT ] [ DEFRECON ] [ DESCR ]
[ DISCINT ] [ HBINT ] [ KAINT ] [ LOCLADDR ] [ LONGRTY ]
[ LONGTMR ] [ MAXINST ] [ MAXINSTC ] [ MAXMSGL ] [ MCANAME ]
[ MCATYPE ] [ MCAUSER ] [ MODENAME ] [ MONCHL ] [ MRDATA ]
[ MREXIT ] [ MRRTY ] [ MRTMR ] [ MSGDATA ] [ MSGEXIT ]
[ NPMSPEED ] [ PASSWORD ] [ PORT ] [ PROPCTL ] [ PUTAUT ]
[ QMNAME ] [ RCVDATA ] [ RCVEXIT ] [ RESETSEQ ] [ SCYDATA ]
[ SCYEXIT ] [ SENDDATA ] [ SENDEXIT ] [ SEQWRAP ] [ SHARECNV ]
[ SHORTRTY ] [ SHORTTMR ] [ SSLCAUTH ] [ SSLCIPH ] [ SSLKEYP ]
[ SSLKEYR ] [ SSLPEER ] [ STATUS ] [ TPNAME ] [ TRPTYPE ]
[ TYPE ] [ USECLTID ] [ USEDLQ ] [ USERID ] [ XMITQ ]
DISPLAY CHANNEL(*)
DISPLAY CHANNEL(*) ALL
DISPLAY CHANNEL(*) TRPTYPE,CONVERT
DISPLAY CHANNEL(QM01.TO.QM02)
DISPLAY CHANNEL(QM01.TO.QM02) ALL
DISPLAY CHANNEL(QM01.TO.*) ALL
DISPLAY CHSTATUS(*) CURRENT
DISPLAY CHSTATUS(*) SAVED - Note that the saved status does not apply until at least one batch of messages has been transmitted on the channel.
dis chs (*)
dis chs (*) ALL
dis chs (QM01.TO.QM02) CURMSGS, INDOUBT
dis chs (QM01.TO.QM0*) curmsgs, npmspeed
DISPLAY CHLAUTH (DISPLAY AUTHENTICATION RECORD)
SYNONYM: DIS CHLAUTHPURPOSE: To display channel authentication record.
DISPLAY CHLAUTH( channel_profile )
[ WHERE( filter_keyword operator filter_value ) ]
[ TYPE( ALL ) ]
MATCH( RUNCHECK )
ADDRESS( string )
QMNAME( qmname ) | CLNTUSER( string )
[ SSLPEER( string ) ]
[ ALL ] [ ALTDATE ] [ ALTTIME ] [ CUSTOM ]
[ DESCR ]
DISPLAY CHLAUTH (*)
DISPLAY CHLAUTH (*) ALL
DISPLAY CHLAUTH (SYSTEM.ADMIN.SVRCONN) DESC, ALTDATE
dis chlauth (*)
dis chlauth (*) all
dis chlauth (SYSTEM.ADMIN.SVRCONN) altdate, alttime
DISPLAY CHSTATUS (DISPLAY CHANNEL STATUS)
SYNONYM: DISPLAY CHSPURPOSE: To display one or more channel status
DISPLAY CHSTATUS( generic_channel_name )
[ WHERE( filter_keyword operator filter_value ) ]
[ CURRENT | SAVED ] [ ALL ]
[ CONNAME( connection_name ) ] [ XMITQ( q_name ) ]
[ BATCHES ] [ BATCHSZ ] [ BUFSRCVD ] [ BUFSSENT ] [ BYTSRCVD ]
[ BYTSSENT ] [ CHSTADA ] [ CHSTATI ] [ COMPHDR ] [ COMPMSG ]
[ COMPRATE ] [ COMPTIME ] [ CURLUWID ] [ CURMSGS ] [ CURSEQNO ]
[ CURSHCNV ] [ EXITTIME ] [ HBINT ] [ INDOUBT ] [ JOBNAME ]
[ LOCLADDR ] [ LONGRTS ] [ LSTLUWID ] [ LSTMSGDA ] [ LSTMSGTI ]
[ LSTSEQNO ] [ MAXSHCNV ] [ MCASTAT ] [ MCAUSER ] [ MONCHL ]
[ MONITOR ] [ MSGS ] [ NETTIME ] [ NPMSPEED ] [ RAPPLTAG ]
[ RPRODUCT ] [ RQMNAME ] [ RVERSION ] [ SHORTRTS ] [ SSLCERTI ]
[ SSLKEYDA ] [ SSLKEYTI ] [ SSLPEER ] [ SSLRKEYS ] [ STATUS ]
[ STOPREQ ] [ SUBSTATE ] [ XBATCHSZ ] [ XQMSGSA ] [ XQTIME ]
DISPLAY CHSTATUS (*)
DISPLAY CHSTATUS (*) ALL
DISPLAY CHSTATUS (01.TO*) CURRENT
dis chstatus (*)
dis chstatus (chl.01.02) all
dis chstatus (01.TO*) indoubt
DISPLAY CLUSQMGR (DISPLAY CLUSTER QUEUEMANAGER DETAILS)
SYNONYM: DIS CLUSQMGRPURPOSE: To display details about cluster channels for queue managers.
DISPLAY CLUSQMGR( generic_Q_Mgr_name )
[ WHERE( filter_keyword operator filter_value ) ]
[ CLUSTER( generic_cluster_name ) ] [ CHANNEL( generic_channel_name ) ]
[ ALL ] [ ALTDATE ] [ ALTTIME ] [ BATCHHB ] [ BATCHINT ]
[ BATCHSZ ] [ CHANNEL ] [ CLUSDATE ] [ CLUSTER ] [ CLUSTIME ]
[ CLWLPRTY ] [ CLWLRANK ] [ CLWLWGHT ] [ COMPHDR ] [ COMPMSG ]
[ CONNAME ] [ CONVERT ] [ DEFTYPE ] [ DESCR ] [ DISCINT ]
[ HBINT ] [ KAINT ] [ LOCLADDR ] [ LONGRTY ] [ LONGTMR ]
[ MAXMSGL ] [ MCANAME ] [ MCATYPE ] [ MCAUSER ] [ MODENAME ]
[ MRDATA ] [ MREXIT ] [ MRRTY ] [ MRTMR ] [ MSGDATA ]
[ MSGEXIT ] [ NETPRTY ] [ NPMSPEED ] [ PASSWORD ] [ PROPCTL ]
[ PUTAUT ] [ QMID ] [ QMTYPE ] [ RCVDATA ] [ RCVEXIT ]
[ SCYDATA ] [ SCYEXIT ] [ SENDDATA ] [ SENDEXIT ] [ SEQWRAP ]
[ SHORTRTY ] [ SHORTTMR ] [ SSLCAUTH ] [ SSLCIPH ] [ SSLPEER ]
[ STATUS ] [ SUSPEND ] [ TPNAME ] [ TRPTYPE ] [ USEDLQ ]
[ USERID ]
Make sure that you run the this mqsc command on any of the QM on the cluster.
DISPLAY CLUSQMGR (*)
DISPLAY CLUSQMGR (*) all
DISPLAY CLUSQMGR (QM.JOE.02) all
dis clusqmgr (*) qmtype
dis clusqmgr (QM.JOE.02) channel, conname, descr
DISPLAY COMMINFO (DISPLAY COMMUNICATION INFORMATION)
SYNONYM: DIS COMMINFOPURPOSE: To display communication information object's attributes.
DISPLAY COMMINFO( comminfo_name )
[ WHERE( filter_keyword operator filter_value ) ]
[ TYPE( MULTICAST ) ]
[ ALL ] [ ALTDATE ] [ ALTTIME ] [ BRIDGE ] [ CCSID ]
[ COMMEV ] [ DESCR ] [ ENCODING ] [ GRPADDR ] [ MCHBINT ]
[ MCPROP ] [ MONINT ] [ MSGHIST ] [ NSUBHIST ] [ PORT ]
[ TYPE ]
DISPLAY COMMINFO (*)
DISPLAY COMMINFO (*) ALL
DISPLAY COMMINFO (SYSTEM.DEFAULT.COMMINFO.MULTICAST) PORT, DESCR
dis comminfo (*)
dis comminfo (*) all
dis comminfo (SYSTEM.DEFAULT.COMMINFO.MULTICAST) port, descr
DISPLAY CONN (DISPLAY CONNECTION INFORMATION)
SYNONYM: DIS CONNPURPOSE: To display connections details about the systems connected to the Queue manager.
DISPLAY CONN( connection_name )
[ WHERE( filter_keyword operator filter_value ) ]
[ EXTCONN( connection_name ) ]
[ TYPE( CONN | HANDLE | * | ALL ) ]
[ ALL ] [ APPLDESC ] [ APPLTAG ] [ APPLTYPE ] [ ASTATE ]
[ CHANNEL ] [ CONNAME ] [ CONNOPTS ] [ DEST ] [ DESTQMGR ]
[ EXTURID ] [ HSTATE ] [ OBJNAME ] [ OBJTYPE ] [ OPENOPTS ]
[ PID ] [ QMURID ] [ READA ] [ SUBID ] [ SUBNAME ]
[ TID ] [ TOPICSTR ] [ UOWLOG ] [ UOWLOGDA ] [ UOWLOGTI ]
[ UOWSTATE ] [ UOWSTDA ] [ UOWSTTI ] [ URTYPE ] [ USERID ]
DISPLAY CONN (*)
DISPLAY CONN (*) ALL
DISPLAY CONN (*) PID
DISPLAY CONN (*) PID, USERID, CHANNEL
dis conn (*)
dis conn (*) all
dis conn (*) userid
dis conn (*) channel, appltype, userid
DISPLAY ENTAUTH (DISPLAY ENTITY AUTHORIZATION)
SYNONYM: DIS ENTAUTHPURPOSE: To display the authorizations an entity.
DISPLAY ENTAUTH
PRINCIPAL( principal_name ) | GROUP( group_name )
[ OBJNAME( obj_name )]
OBJTYPE( AUTHINFO | CHANNEL | CLNTCONN | COMMINFO | LISTENER |
NAMELIST | PROCESS | QMGR | QUEUE | RQMNAME |
SERVICE | TOPIC )
[ SERVCOMP( service_component_name ) ]
[ ALL ] [ AUTHLIST ] [ ENTITY ] [ ENTTYPE ] [ OBJTYPE ]
DISPLAY LISTENER (DISPLAY ENTITY AUTHORIZATION)
SYNONYM: DIS LSTRPURPOSE: To display listeners details.
DISPLAY LISTENER( listener_name )
[ WHERE( filter_keyword operator filter_value ) ]
[ TRPTYPE( ALL | NETBIOS | LU62 | SPX | TCP ) ]
[ ALL ] [ ADAPTER ] [ ALTDATE ] [ ALTTIME ] [ BACKLOG ]
[ COMMANDS ] [ CONTROL ] [ DESCR ] [ IPADDR ] [ LOCLNAME ]
[ NTBNAMES ] [ PORT ] [ SESSIONS ] [ SOCKET ] [ TPNAME ]
[ TRPTYPE ]
DISPLAY LISTENER (*)
DISPLAY LISTENER (*) ALL
DISPLAY LISTENER (*) PORT, DESCR
DISPLAY LISTENER (BO_LISTENER*) PORT, TRPTYPE
dis listener (*)
dis listener (*) all
dis listener (*) port
dis listener (BO_LISTENER1) all
DISPLAY LSSTATUS (DISPLAY LISTENER STATUS)
SYNONYM: DIS LSSTATUSPURPOSE: To display one or more listeners status.
DISPLAY LSSTATUS( listener_name )
[ WHERE( filter_keyword operator filter_value ) ]
[ ALL ] [ ADAPTER ] [ BACKLOG ] [ COMMANDS ] [ CONTROL ]
[ DESCR ] [ IPADDR ] [ LOCLNAME ] [ NTBNAMES ] [ PID ]
[ PORT ] [ SESSIONS ] [ SOCKET ] [ STARTDA ] [ STARTTI ]
[ STATUS ] [ TPNAME ] [ TRPTYPE ]
DISPLAY LSSTATUS (*)
DISPLAY LSSTATUS (*) ALL
DISPLAY LSSTATUS (*) DESCR
DISPLAY LSSTATUS (BO_LISTENER*) PORT, DESCR, PID
dis lsstatus (*)
dis lsstatus (*) all
dis lsstatus (*) port, descr
dis lsstatus (BO_LISTENER1) pid
DISPLAY NAMELIST (DISPLAY NAMELIST DETAILS)
SYNONYM: DIS NAMELISTPURPOSE: To display namelist details.
DISPLAY NAMELIST( generic_namelist_name )
[ WHERE( filter_keyword operator filter_value ) ]
[ ALL ] [ ALTDATE ] [ ALTTIME ] [ DESCR ] [ NAMCOUNT ] [ NAMES ]
DISPLAY NAMELIST (*)
DISPLAY NAMELIST (*) ALL
DISPLAY NAMELIST (SYSTEM.DEFAULT.NAMELIST) DESCR
DISPLAY NAMELIST (MQM_NAMELIST_0*) DESCR, NAMES
dis namelist (*)
dis namelist (*) all
dis namelist (system.default.namelist) descr
dis namelist (MQM_NAMELIST_O*) names, descr, namcount
DISPLAY PROCESS (DISPLAY PROCESS DETAILS)
SYNONYM: DIS PROPURPOSE: To display one or more MQ QM's process details.
DISPLAY PROCESS( generic_process_name )
[ WHERE( filter_keyword operator filter_value ) ]
[ ALL ]
[ ALTDATE ] [ ALTTIME ] [ APPLICID ] [ APPLTYPE ] [ DESCR ] [ ENVRDATA ] [ USERDATA ]
DISPLAY PROCESS (*)
DISPLAY PROCESS (*) ALL
DISPLAY PROCESS (MQ_PROCESS_01) DESCR
DISPLAY PROCESS (QM_PROCESS_*) DESCR, ENVRDATA, USERDATA
dis process (*)
dis process (*) all
dis process (QM_PROCESS_01) descr
dis process (QM_PROCESS_*) desc, evnrdata, userdata
DISPLAY PUBSUB (DISPLAY PUBLISH/SUBSCRIBE STATUS INFORMATION)
SYNONYM: NonePURPOSE: To display publish/subscribe status information for a queue manager.
DISPLAY PUBSUB
[ WHERE( filter_keyword operator filter_value ) ]
[ TYPE( ALL | LOCAL | PARENT | CHILD ) ]
[ ALL ] [ QMNAME ] [ STATUS ] [ TYPE ]
DISPLAY PUBSUB ALL
DISPLAY PUBSUB TYPE
DISPLAY QALIAS(DISPLAY QUEUE ALIAS)
SYNONYM: DIS QALIASPURPOSE: To display one or more alias queue information.
DISPLAY QALIAS( generic_q_name )
[ WHERE( filter_keyword operator filter_value ) ]
[ CLUSTER( generic_cluster_name ) ] [ CLUSNL( generic_namelist_name ) ]
[ ALL ] [ ALTDATE ] [ ALTTIME ] [ CLUSDATE ] [ CLUSINFO ]
[ CLUSNL ] [ CLUSQMGR ] [ CLUSQT ] [ CLUSTER ] [ CLUSTIME ]
[ CLWLPRTY ] [ CLWLRANK ] [ CUSTOM ] [ DEFBIND ] [ DEFPRESP ]
[ DEFPRTY ] [ DEFPSIST ] [ DEFREADA ] [ DESCR ] [ GET ]
[ PROPCTL ] [ PUT ] [ QMID ] [ QTYPE ] [ SCOPE ]
[ TARGET ] [ TARGTYPE ] [ TYPE ]
DISPLAY QALIAS (*)
DISPLAY QALIAS (*) ALL
DISPLAY QALIAS (TEST.ALIAS.*) ALTDATE
DISPLAY QALIAS (TEST.ALIAS.Q) ALTDATE, DESCR
dis qalias (*)
dis qalias (*) all
dis qalias (test*) altdate
dis qalias (test.alias.q) descr
DISPLAY QCLUSTER (DISPLAY QUEUE CLUSTER)
SYNONYM: DIS QCLUSTERPURPOSE: To display one or more cluster queue information for cluster.
DISPLAY QCLUSTER( generic_q_name )
[ WHERE( filter_keyword operator filter_value ) ]
[ CLUSTER( generic_cluster_name ) ]
[ ALL ] [ ALTDATE ] [ ALTTIME ] [ CLUSDATE ] [ CLUSQMGR ]
[ CLUSQT ] [ CLUSTIME ] [ CLWLUSEQ ] [ DEFBIND ] [ DEFPRTY ]
[ DEFPSIST ] [ DESCR ] [ PUT ] [ QTYPE ] [ STATQ ]
[ TYPE ]
DISPLAY QCLUSTER(*) ALL
dis qcluster(*) descr, clusqmgr
DISPLAY QLOCAL(DISPLAY QUEUE LOCAL)
SYNONYM: DIS QLOCALPURPOSE: To display one or more local queue information.
DISPLAY QLOCAL( generic_q_name )
[ WHERE( filter_keyword operator filter_value ) ]
[ CLUSTER( generic_cluster_name ) ] [ CLUSNL( generic_namelist_name ) ]
[ ALL ] [ ACCTQ ] [ ALTDATE ] [ ALTTIME ] [ BOQNAME ]
[ BOTHRESH ] [ CLUSDATE ] [ CLUSINFO ] [ CLUSNL ] [ CLUSQMGR ]
[ CLUSQT ] [ CLUSTER ] [ CLUSTIME ] [ CLWLPRTY ] [ CLWLRANK ]
[ CLWLUSEQ ] [ CRDATE ] [ CRTIME ] [ CURDEPTH ] [ CUSTOM ]
[ DEFBIND ] [ DEFPRESP ] [ DEFPRTY ] [ DEFPSIST ] [ DEFREADA ]
[ DEFSOPT ] [ DEFTYPE ] [ DESCR ] [ DISTL ] [ GET ]
[ HARDENBO ] [ INITQ ] [ IPPROCS ] [ MAXDEPTH ] [ MAXMSGL ]
[ MONQ ] [ MSGDLVSQ ] [ NPMCLASS ] [ OPPROCS ] [ PROCESS ]
[ PROPCTL ] [ PUT ] [ QDEPTHHI ] [ QDEPTHLO ] [ QDPHIEV ]
[ QDPLOEV ] [ QDPMAXEV ] [ QMID ] [ QSVCIEV ] [ QSVCINT ]
[ QTYPE ] [ RETINTVL ] [ SCOPE ] [ SHARE ] [ STATQ ]
[ TRIGDATA ] [ TRIGDPTH ] [ TRIGGER ] [ TRIGMPRI ] [ TRIGTYPE ]
[ TYPE ] [ USAGE ]
DISPLAY QLOCAL (*)
DISPLAY QLOCAL (*) ALL
DISPLAY QLOCAL (JOE.TEST.*) CURDEPTH
DISPLAY QLOCAL (JOE.TEST.COMMAND.Q) CURDEPTH, ALTDATE
dis qlocal (*)
dis qlocal (*) all
dis qlocal (JOE.TEST.*) curdepth
dis qlocal (JOE.TEST.COMMAND.Q) curdepth, altdate
DISPLAY QMGR(DISPLAY QUEUE MANAGER DETAILS)
SYNONYM: DIS QMGR
PURPOSE: To display queue manager parameters information.
[ ALL ]
[ SYSTEM ] [ EVENT ] [ DQM ] [ CLUSTER ] [ PUBSUB ]
[ ACCTCONO ] [ ACCTINT ] [ ACCTMQI ] [ ACCTQ ] [ ACTIVREC ]
[ ACTVCONO ] [ ACTVTRC ] [ ALTDATE ] [ ALTTIME ] [ AUTHOREV ]
[ CCSID ] [ CERTVPOL ] [ CHAD ] [ CHADEV ] [ CHADEXIT ]
[ CHLAUTH ] [ CHLEV ] [ CLWLDATA ] [ CLWLEXIT ] [ CLWLLEN ]
[ CLWLMRUC ] [ CLWLUSEQ ] [ CMDEV ] [ CMDLEVEL ] [ COMMANDQ ]
[ CONFIGEV ] [ CRDATE ] [ CRTIME ] [ CUSTOM ] [ DEADQ ]
[ DEFXMITQ ] [ DESCR ] [ DISTL ] [ INHIBTEV ] [ IPADDRV ]
[ LOCALEV ] [ LOGGEREV ] [ MARKINT ] [ MAXHANDS ] [ MAXMSGL ]
[ MAXPROPL ] [ MAXPRTY ] [ MAXUMSGS ] [ MONACLS ] [ MONCHL ]
[ MONQ ] [ PARENT ] [ PERFMEV ] [ PLATFORM ] [ PSCLUS ]
[ PSMODE ] [ PSNPMSG ] [ PSNPRES ] [ PSRTYCNT ] [ PSSYNCPT ]
[ QMID ] [ QMNAME ] [ REMOTEEV ] [ REPOS ] [ REPOSNL ]
[ ROUTEREC ] [ SCHINIT ] [ SCMDSERV ] [ SSLCRLNL ] [ SSLCRYP ]
[ SSLFIPS ] [ SSLEV ] [ SSLKEYR ] [ SSLRKEYC ] [ STATACLS ]
[ STATCHL ] [ STATINT ] [ STATMQI ] [ STATQ ] [ STRSTPEV ]
[ SUITEB ] [ SYNCPT ] [ TREELIFE ] [ TRIGINT ] [ VERSION ]
[ XRCAP ]
DISPLAY QMGR
DISPLAY QMGR ALL
DISPLAY QMGR MAXMSGL
DISPLAY QMGR MAXMSGL, SSLKEYR
dis qmgr
dis qmgr all
dis qmgr deadq
dis qmgr deadq, descr
DISPLAY QMODEL(DISPLAY QUEUE MODEL)
SYNONYM: DIS QMODELPURPOSE: To display one or more model queue information.
DISPLAY QMODEL( generic_q_name )
[ WHERE( filter_keyword operator filter_value ) ]
[ ALL ] [ ACCTQ ] [ ALTDATE ] [ ALTTIME ] [ BOTHRESH ]
[ BOQNAME ] [ CRDATE ] [ CRTIME ] [ CUSTOM ] [ DEFPRESP ]
[ DEFPRTY ] [ DEFPSIST ] [ DEFREADA ] [ DEFSOPT ] [ DEFTYPE ]
[ DESCR ] [ DISTL ] [ GET ] [ HARDENBO ] [ INITQ ]
[ MAXDEPTH ] [ MAXMSGL ] [ MONQ ] [ MSGDLVSQ ] [ NPMCLASS ]
[ PROCESS ] [ PUT ] [ PROPCTL ] [ QDEPTHHI ] [ QDEPTHLO ]
[ QDPHIEV ] [ QDPLOEV ] [ QDPMAXEV ] [ QSVCIEV ] [ QSVCINT ]
[ QTYPE ] [ RETINTVL ] [ SHARE ] [ STATQ ] [ TRIGDATA ]
[ TRIGDPTH ] [ TRIGGER ] [ TRIGMPRI ] [ TRIGTYPE ] [ TYPE ]
[ USAGE ]
DISPLAY QMODEL (*)
DISPLAY QMODEL (*) ALL
DISPLAY QMODEL (JOE.TEST.*) BOTHRESH
DISPLAY QMODEL (JOE.TEST.MODEL.Q) BOTHRESH, ALTDATE
dis qmodel (*)
dis qmodel (*) all
dis qmodel (JOE.TEST.*) bothresh
dis qmodel (JOE.TEST.*) bothresh, altdate
DISPLAY QMSTATUS(DISPLAY QUEUE MANAGER STATUS)
SYNONYM: DIS QMSTATUSPURPOSE: To display the status of the Queue manager associated.
DISPLAY QMODEL( generic_q_name )
[ WHERE( filter_keyword operator filter_value ) ]
[ ALL ] [ ACCTQ ] [ ALTDATE ] [ ALTTIME ] [ BOTHRESH ]
[ BOQNAME ] [ CRDATE ] [ CRTIME ] [ CUSTOM ] [ DEFPRESP ]
[ DEFPRTY ] [ DEFPSIST ] [ DEFREADA ] [ DEFSOPT ] [ DEFTYPE ]
[ DESCR ] [ DISTL ] [ GET ] [ HARDENBO ] [ INITQ ]
[ MAXDEPTH ] [ MAXMSGL ] [ MONQ ] [ MSGDLVSQ ] [ NPMCLASS ]
[ PROCESS ] [ PUT ] [ PROPCTL ] [ QDEPTHHI ] [ QDEPTHLO ]
[ QDPHIEV ] [ QDPLOEV ] [ QDPMAXEV ] [ QSVCIEV ] [ QSVCINT ]
[ QTYPE ] [ RETINTVL ] [ SHARE ] [ STATQ ] [ TRIGDATA ]
[ TRIGDPTH ] [ TRIGGER ] [ TRIGMPRI ] [ TRIGTYPE ] [ TYPE ]
[ USAGE ]
DISPLAY QMSTATUS
DISPLAY QMSTATUS ALL
DISPLAY QMSTATUS STARTDA
DISPLAY QMSTATUS STARTDA, STARTTI
dis qmstatus
dis qmstatus all
dis qmstatus chinit
dis qmstatus chinit, instpath
DISPLAY QREMOTE(DISPLAY QUEUE REMOTE)
SYNONYM: DIS QREMOTEPURPOSE: To display one or more remote queue information.
DISPLAY QREMOTE( generic_q_name )
[ WHERE( filter_keyword operator filter_value ) ]
[ CLUSTER( generic_cluster_name ) ] [ CLUSNL( generic_namelist_name ) ]
[ ALL ] [ ALTDATE ] [ ALTTIME ] [ CLUSDATE ] [ CLUSINFO ]
[ CLUSNL ] [ CLUSQMGR ] [ CLUSQT ] [ CLUSTER ] [ CLUSTIME ]
[ CLWLPRTY ] [ CLWLRANK ] [ CUSTOM ] [ DEFBIND ] [ DEFPRESP ]
[ DEFPRTY ] [ DEFPSIST ] [ DESCR ] [ PUT ] [ QMID ]
[ QTYPE ] [ RNAME ] [ RQMNAME ] [ SCOPE ] [ TARGET ]
[ TYPE ] [ XMITQ ]
DISPALY QREMOTE (*)
DISPLAY QREMOTE (*) ALL
DISPLAY QREMOTE (QM02)
DISPLAY QREMOTE (QM*) XMITQ
dis qremote (*)
dis qremote (*) all
dis qremote (QM02) all
dis qremote (QM02) xmitq
DISPLAY QSTATUS(DISPLAY QUEUE STATUS)
SYNONYM: DIS QSPURPOSE: To display one or more queue status information.
DISPLAY QSTATUS( q_name ) TYPE( QUEUE )
[ WHERE( filter_keyword operator filter_value ) ]
[ CURDEPTH ] [ IPPROCS ] [ MEDIALOG ] [ LGETDATE ] [ LGETTIME ]
[ LPUTDATE ] [ LPUTTIME ] [ MONITOR ] [ MONQ ] [ MSGAGE ]
[ OPPROCS ] [ QTIME ] [ UNCOM ]
DISPLAY QSTATUS( q_name ) TYPE ( HANDLE )
[ WHERE( filter_keyword operator filter_value ) ]
[ OPENTYPE ( ALL | INPUT | OUTPUT ) ]
[ APPLDESC ] [ APPLTAG ] [ APPLTYPE ] [ ASTATE ] [ BROWSE ]
[ CHANNEL ] [ CONNAME ] [ HSTATE ] [ INPUT ] [ INQUIRE ]
[ OUTPUT ] [ PID ] [ QMURID ] [ SET ] [ TID ]
[ URID ] [ URTYPE ] [ USERID ]
DISPLAY QSTATUS (*)
DISPLAY QSTATUS (*) ALL
DISPLAY QSTATUS (QM*) LGETDATE
DISPLAY QSTATUS (QM.01.02.XMIT.Q) LGETDATE, LPUTDATE
dis qstatus (*)
dis qstatus (*) ALL
dis qstatus (QM*) LGETDATE
dis qstatus (QM.01.02.XMIT.Q) LGETDATE, LPUTDATE
DISPLAY QUEUE(DISPLAY QUEUE DETAILS)
SYNONYM: DIS QPURPOSE: To display one or more queue attributes.
DISPLAY QUEUE( generic_q_name )
[ WHERE( filter_keyword operator filter_value ) ]
[ CLUSTER( generic_cluster_name ) ] [ CLUSNL( generic_namelist_name )
[ TYPE( QALIAS | QCLUSTER | QLOCAL | QMODEL | QREMOTE ) ]
[ ALL ] [ ALTDATE ] [ ALTTIME ] [ BOQNAME ] [ BOTHRESH ]
[ CLUSDATE ] [ CLUSINFO ] [ CLUSNL ] [ CLUSQMGR ] [ CLUSQT ]
[ CLUSTER ] [ CLUSTIME ] [ CLWLPRTY ] [ CLWLRANK ] [ CLWLUSEQ ]
[ CRDATE ] [ CRTIME ] [ CURDEPTH ] [ CUSTOM ] [ DEFBIND ]
[ DEFPRESP ] [ DEFPRTY ] [ DEFPSIST ] [ DEFREADA ] [ DEFSOPT ]
[ DEFTYPE ] [ DESCR ] [ DISTL ] [ GET ] [ HARDENBO ]
[ INITQ ] [ IPPROCS ] [ MAXDEPTH ] [ MAXMSGL ] [ MONQ ]
[ MSGDLVSQ ] [ OPPROCS ] [ PROCESS ] [ PROPCTL ] [ PUT ]
[ QDEPTHHI ] [ QDEPTHLO ] [ QDPHIEV ] [ QDPLOEV ] [ QDPMAXEV ]
[ QMID ] [ QSVCIEV ] [ QSVCINT ] [ QTYPE ] [ RETINTVL ]
[ RNAME ] [ RQMNAME ] [ SCOPE ] [ SHARE ] [ TARGET ]
[ TARGTYPE ] [ TRIGDATA ] [ TRIGDPTH ] [ TRIGGER ] [ TRIGMPRI ]
[ TRIGTYPE ] [ TYPE ] [ USAGE ] [ XMITQ ]
DISPLAY QUEUE (*)
DISPLAY QUEUE (*) ALL
DISPLAY QUEUE (*) ALTDATE
DISPLAY QUEUE (*) ALTDATE, DESCR
dis queue (*)
dis queue (*) all
dis queue (*) maxdepth
dis queue (*) maxdepth, trigdpth
DISPLAY SBSTATUS(DISPLAY SUBSCRIPTION STATUS)
SYNONYM: DIS SBSTATUSPURPOSE: To display the status of a subscription.
DISPLAY SBSTATUS ( subscription_name )
DISPLAY SBSTATUS SUBID( subscription_id )
[ WHERE( filter_keyword operator filter_value ) ]
[ DURABLE( ALL | YES | NO ) ]
[ SUBTYPE( ALL | ADMIN | API | PROXY | USER ) ]
[ ALL ] [ ACTCONN ] [ DURABLE ] [ LMSGDATE ] [ LMSGTIME ]
[ MCASTREL ] [ NUMMSGS ] [ RESMDATE ] [ RESMTIME ] [ SUBTYPE ]
[ SUBUSER ]
DISPLAY SBSTATUS (*)
DISPLAY SBSTATUS (*) ALL
DISPLAY SBSTATUS (SYSTEM.DEFAULT.SUB) SUBUSER, LMSGDATE
DISPLAY SBSTATUS SUBID (414D5120514D2E4A4F452E3031202020DE3F7D5420001007) ALL
DISPLAY SBSTATUS SUBID (414D5120514D2E4A4F452E3031202020DE3F7D5420001007) LMSGDATE, LMSGTIME
dis sbstatus (PARENT) ALL
dis sbstatus (PARENT) lmsgdate, lmsgtime
DISPLAY SERVICE(DISPLAY SERVICE)
SYNONYM: NonePURPOSE: To display information about a service.
DISPLAY SERVICE( service_name )
[ WHERE( filter_keyword operator filter_value ) ]
[ ALL ] [ ALTDATE ] [ ALTTIME ] [ CONTROL ] [ DESCR ]
[ SERVTYPE ] [ STARTARG ] [ STARTCMD ] [ STDOUT ] [ STDERR ]
[ STOPARG ] [ STOPCMD ]
DISPLAY SERVICE (*)
DISPLAY SERVICE (*) ALL
DISPLAY SERVICE (QM_SERVICE_START) STARTCMD, STARTARG
DISPLAY SERVICE (QM_SERVICE_STOP) STOPCMD, STOPARG
dis service (*)
dis service (*) all
dis service (qm_service_start) startcmd, startarg
dis service (qm_service_stop) stopcmd, stoparg
DISPLAY SUB(DISPLAY SUBSCRIPTION)
SYNONYM: DIS SUBPURPOSE: To display the attributes associated with a subscription.
DISPLAY SUB( subscription_name )
DISPLAY SUB SUBID( subscription_id )
[ WHERE( filter_keyword operator filter_value ) ]
[ DURABLE( ALL | YES | NO ) ]
[ SUBTYPE( ALL | ADMIN | API | PROXY | USER ) ]
[ ALL ] [ ALTDATE ] [ ALTTIME ] [ CRDATE ] [ CRTIME ]
[ DEST ] [ DESTCORL ] [ DESTCLAS ] [ DESTQMGR ] [ DURABLE ]
[ EXPIRY ] [ PSPROP ] [ PUBACCT ] [ PUBAPPID ] [ PUBPRTY ]
[ REQONLY ] [ SELECTOR ] [ SELTYPE ] [ SUB ] [ SUBID ]
[ SUBLEVEL ] [ SUBSCOPE ] [ SUBTYPE ] [ SUBUSER ] [ SUMMARY ]
[ TOPICOBJ ] [ TOPICSTR ] [ USERDATA ] [ VARUSER ] [ WSCHEMA ]
DISPLAY SUB (*)
DISPLAY SUB (*) ALL
DISPLAY SUB (MQ_SUB_022) ALL
DISPLAY SUB (MQ_SUB_022) EXPIRY, DESCR
DISPLAY SUB SUBID (414D5120514D2E4A4F452E3031202020D63F7D5410000006)
DISPLAY SUB SUBID (414D5120514D2E4A4F452E3031202020D63F7D5410000006) ALL
DISPLAY SUB SUBID (414D5120514D2E4A4F452E3031202020D63F7D5410000006) EXPIRY, DESCR, SUB
dis sub (*)
dis sub (MQ_SUB_024) expiry
dis sub subid(414D5120514D2E4A4F452E3031202020D63F7D5410000006) expiry, sub, durable
No comments:
Post a Comment